Windows xp sp3 reinstall tcp ip




















It will then begin the repair install. You will be asked to confirm the date and time as well as a few other basic questions. Most of the time, the default option is acceptable. Enter the Product Key. Towards the end of the installation, you will be asked to enter the product key. Windows will check to make sure it is a valid key before proceeding. After installation, you will have to authorize your copy of Windows online or over the phone.

The Product Activation wizard will appear when you log into your newly repaired copy. If you have an internet connection, then you should be able to authenticate your copy by clicking a button. Check your programs. Once the installation is complete, you will be taken to your repaired install of Windows. Because certain system files were replaced, some of your installed programs may not function, and may need to be reinstalled.

Some of your devices may need to have their drivers reinstalled. To see which devices are not installed properly, open the Start Menu and right-click My Computer. Select the Hardware Tab, and then click Device Manager.

If there are devices with a yellow exclamation point, then they may need their drivers reinstalled. Method 2. Backup your data. Formatting and reinstalling Windows will wipe your hard drive clean. Be absolutely sure that you have backups of all your important files before starting. Pictures, movies, documents, and music will all be erased. Insert your Windows CD. Make note of your Windows Product Key, you will need it during the installation. Boot from the Windows CD to start the setup program Details for this step can be found in steps in the first section of this guide.

Windows will load the drivers for the setup program. Once this is complete, press Enter at the Welcome screen to start the setup. Do not enter the recovery console. Hit F8 once you are done reading the agreement to continue the setup process. Press Esc to continue with a fresh install. Delete the partition. You should see a list of your hard drive partitions. These are your C: and D: drives The lettering is dependent on the way the system was set up.

This is your last chance to restart and back up any files you forgot. Once the partition is deleted, your data is gone. Create a new partition. Select the unpartitioned space. Press C to create a new partition. Enter the maximum size possible and press Enter. You can create smaller a smaller partition if you want to create other partitions in your hard drive later through Windows.

There are multiple reasons why someone might do this, but for most users simply creating the largest partition possible should be fine. Begin Windows setup. Once the partition is created, highlight it and press Enter to begin the Windows installation. You will be asked to format the partition. Formatting will begin. This could take up to several hours depending on the size and speed of your hard drive, but for most users it will take a few minutes.

Windows will begin installing. This is a mostly automated process that requires the user to enter some data at a few points. The first option that pops up is changing the default language and region. NOTE: If you did choose to backup the registry before running the Fix , I do not recommend restoring from the registry backup you created if the WinSox Xp Fix was successful in repairing your Network settings. If the problem was registry related, restoring will just put the problem back in the registry.

Filed under Windows Tips by Mike Boyds. This is an awesome fix tool, had problems with my windows XP PC for quite some time, but this tool fixed all those issues.

I had a customers computer come in today with a corrupt stack, and was considering re-installing windows, did a google search for a tool to fix the TCP stack and was brought to this tools page, i figured what the hell, and downloaded it….. Thanks a lot for the creator….. I agree, this is one of the best "last resort" tools around.

Saved me from needing to rebuild a lot of customers PC's. Got the system back on the internal network, backed up and running fanatastic! So i used this product and i see that it really does notwork maybe i am using it wrong please get back to me and give me some pointers that reguard this program! There's really not much to running the utility as described in the article. I use it when nothing else works and if this utility does not fix the problem, then I usually end up reinstalling Windows.

This is the best utility ever. Awesome tool.. Due to a virus outbreak Sasser, backdoor. I would always receive a network error immediately when trying to access any other machine.

This tool repaired the damage done to the network configuration perfectly! Wonderful tool! Unfortunately this tool did not fix my connection issue. Any other ideas? I know I think, lol the problem is with winsock…I have the dreaded If this command along with Winsox XP Fix does not resolve your problem, it may be time to start over and re-install XP.

Do you have any other solutions? The fix did not work on my PC which is running SP2. I get the This will probably fix your problems if you can only connect to networks under "safe mode with networking". Here's the story. All of a sudden, without warning, one day my computer would not connect to any type of network. At first I thought it was a wireless problem, then I found it was not recognizing even a wired network.

I found out I could connect to a network but only in safe mode with networking. Brilliant application, I been banging my head against a brick wall with a customers PC.

Tried the hardcore method. After the final reboot, a torrent program on the host OS was able to connect for about 10 seconds. No connectivity after that. I get a svchost error when I log in and cannot open any programs. Any help will be appreciated. Comment by Zakir January 6, Reply. I tried all of the steps you suggested and I still could not get out to the internet. I could ping local servers and access SharePoint but could not get pass the router.

I removed all updates from the last auto update and it worked. Comment by HR February 15, Reply. Tried on on pc that would not load internet and would not launch firewall, worked perfect. Comment by Bt April 1, Reply. Comment by Richard April 5, Reply. You are a hero! Following your clear instructions, 5 minutes was all it took to get tcp-ip back up and running. Many thanks. Comment by Jon April 24, Reply. I tried your method and it worked perfectly. I am now back on line and everything is working well.

Many thanks for your technical savvy and advie for this fix. Comment by Rob May 17, Reply. Comment by Dave June 10, Reply.

Thank you. Thank you, thank you, thank you! Comment by Ted July 31, Reply. I couldnt get past the R for repair part as I forgot my Admin password, however, I found the Hardcore simpler and faster. Thanks a ton. Comment by Kalyan July 31, Reply. Comment by Roncey August 7, Reply. I tried the hardcore methode again, and did additionally uninstall all other network services and network adapters after doing Step 1. After reinstalling, everything was working perfectly!

Comment by Peter August 17, Reply. Spent whole day looking and trying all sorts. Comment by WolfWare September 14, Reply. Comment by Chris September 22, Reply. Comment by sapexi November 14, Reply. Comment by Oliver December 15, Reply.

Sir, You are perfect at your job. My job is also the same. Users will register for your mailing lists and you should e-mail them every new entry in your blog post or a link to that. It will be a more useful idea for increasing the no. Comment by Abhay Mittal March 16, Reply. Comment by Smokey March 18, Reply.

Is formatting and reinstalling C drive or the XP installed drive, will fix Local area connection problem? Comment by Mallikkannan May 16, Reply. Comment by Anit July 18, Reply. Comment by Carol August 2, Reply. Thank you! Comment by Mark August 21, Reply.

Comment by koby Peleg Hen August 25, Reply. Thanks alot, it worked for me. I was on it for 3 hours since I saw your comments Thanks again. Comment by Naysan November 18, Reply. Ahhhh…the wonder of google!

Hardcore method worked perfectly to restore internet after infection from the rootkit. Comment by Ian Kemp November 20, Reply.

Save my Bacon, tcpip. Comment by Tech Checkers November 21, Reply. In a single word…. What had me spend hours trying to fix was quickly resolved in under 5 minutes!! Great job!! Unbelievable Fixed a problem I have been working on for 8 hours straight.

My client will be very happy I didnt have to reinstall XP and install the 50 or so programs they use. Thanks so much. In reply to Azam K's post on November 23, Thanks for your help but when I run ipconfig, It says function not supported or something similar and doesn't give me my ip address and gateway info like its supposed to I am noticing several issues with networking.

I'll try to give as much info as possible. I did netsh winsock reset, loaded a winsockxpfix 1. Is there a Microsoft networking fix it program I can load onto it?

In reply to Jay86's post on November 26,



0コメント

  • 1000 / 1000