Aleratec disc repair manual

Improper operating 3. Add page 7 to Favourites. If disc is not sufficiently restored, follow with the Disc Repair procedure. Major Damage Symptoms indicating Major Damage include frozen screen, no sound, no loading, system, or drive is not accessible. Recommendations: First clean the disc with the Disc Cleaning procedure. If not repaired, repeat the Disc Repair procedure until the disc is sufficiently restored. Add page 8 to Favourites.

Remove the cleaning head cover and then use the plastic 2. Remove the cleaning solution from the kit. Then, fill the 3. Note: Upon initial use, a sharp object such as a safety pin must be used to puncture the mouth of the bottle. Then replace the spring and the cleaning head. Use the plastic end of the brush tool to pry each of the two Repair heads into its base. Install each Buffing head onto a base, pressing down gently until they snap into place.

Install the assembled Buffing heads into the motorized 2. Insert the disc data-side facing downward and close the 3. It will run for approximately two minutes and stop automatically when complete.

Press the OPEN button to remove the disc, then follow 5. Add page 12 to Favourites. Do not use solvents. If the Buffing heads become soiled, use the included brush to remove any accumulated matter. Vuelva a colocar la cubierta del cabezal de limpieza.

Add page 46 to Favourites. Pulse OPEN abrir para sacar el disco. Limpie con cuidado el disco con el trapo de microfibra que 8. Add page 47 to Favourites. Saque del envoltorio las unidades de pulido color rosa. Instale cada cabezal de pulido en una base presionando hacia abajo con cuidado hasta que se encajen en su lugar. Coloque los cabezales de pulido que ha montado en las 2. Re-attach the cleaning head cover. If it becomes too damp, It also adds a protective layer to the disc.

Open the top cover by pressing the OPEN button. Remove both of the circular repair heads from the repair 2. Rotate the repair units in a counterclockwise motion until 3.